Your position: Home / In Car / Diagnostic Scan Tools

CR3001 Car Diagnostic Full OBD2 Scanner LAUNCH X431 Engine Code Reader Creader 3001 tool PK ELM327 Scan tool

ICDST12002
CR3001 Car Diagnostic Full OBD2 Scanner LAUNCH X431 Engine Code Reader Creader 3001 tool PK ELM327 Scan tool
Price:
$29.99
Wholesale:
10-24
$14.79
25-49
$14.59
50-99
$14.39
100+
$13.99
    Please select the information you wantX
Quantity:
-
+
(10000 available)
Shipping Cost:
to
Please select the country you want to ship from
  • Description
  • Reviews
Support Full OBD2 functions, Engine Check including: 
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability

Turn Off ''Check Engine'' Light
Parts might cause your check engine light on include:
1.  Gas Cap 2. Oxygen Sensor  3. Air Fuel Ratio Sensor 4. Mass Air Flow Sensor 5. Ignition Coils  6. Spark Plug Wires  7. Spark Plugs  8. Thermostat 9. EGR Valve 10. Evaporatative Emission Canister Purge Valve(EVAP)  11. Catalytic Converter.
If the engine light is not turned off in time
it will Cause Serious environmental pollution, Increased fuel consumption,Increased engine noise.​Increased in temperature.

How to verify whether the vehicle will pass the emission test with this code reader?
After entering the I/M Readiness, there will be 10 results on the list. Misfire monitor, fuel system, componentmonitor, catalyst monitor, heated catalyst, EVAP system, secondary air sys, 02 sensor, O2 sensor heater EGRand/or WVT. There will be an OK if each of them works fine. [Not all vehicles have these 10 parts].

Support Car Models for OBDII diagnostic function:
(Note: CR3001 only Support 12V Gasoline& Dies el, Does not support 24V Truck )
 
CR3001 Support OBD 2 protocols car :
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)

Specifications:
Screen  :1.77 " TFT, 160*128dpi
Voltage Range: 9-18V
Operating Temperature :0℃ -50 ℃ (32 ℉ -122 ℉ )
Environment Temperature -20 ℃ -70 ℃ (-4 ℉ -158 ℉ )
Dimension :  118mm*68mm*22.3mm(4.65" *2.68 " *0.88 " )
Weight:  <200g



Average rating: 5.0
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Hot Items
You can contact
+86 18664589517
+86 18664589517